.LaserMatrix Editor escape codes for various printers
The following tables contain the printer information and escape code sequences needed by the LaserMatrix Editor for several printers. All were obtained from the technical manuals of the printers listed, but only the Star SG-10 has been fully tested. Several configurations are listed for printers with different density options.
_______________________________________
Printer:
@Star Micronics SG-10, SG-15
Page Size: 8-1/2 x 11 inches
Horizontal Density: 240 DPI
Multiple:
Dots per Line: 1,920
Vertical Density: 72 DPI
Printhead Height: 8/72 inch
Smallest Line-feed: 1/144 inch (Star mode)
Width:
cards (8 inches)
Height:
cards (10-1/2 inches)
Initialization Codes:
@27, 64, 27, 51, 15
Graphics Codes:
@27, 103, 3, 128, 7
Small Line-Feed Codes:
@27, 74, 1
ASCII Init Codes:
@27, 64, 27, 51, 23
NLQ Init Codes:
@27, 66, 4
___________________________________
Printer:
@Star Micronics NX-1000
Epson Spectrum LX-80
Page Size: 8-1/2 x 11 inches
Horizontal Density: 240 DPI (Will not print consecutive dots)